Toshiba HI-FI SQPB One-touch Timer Recording OTR, Set TV or Cable option to, Appropriate position

Recording (VCR)

One-touch Timer Recording (OTR)

VCR DVD

The One-touch Timer Recording feature provides a simple and CH +/–

convenient way to make a timed recording.

STOP

REC/OTR

SP/SLP

0–9

One-touch Timer Recording (OTR)

Preparation:

•Turn ON the TV and select to the corresponding video input.

•Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.)

Example: One-touch Timer Recording for 30 minutes.

1 Load a cassette tape with the erase prevention tab intact.

The VCR will automatically turn on.

2 Press SP/SLP to select the desired tape speed SP or SLP.

The tape counter and “SP” or “SLP” will appear on the screen for about 4 seconds.

￿￿￿￿￿￿￿￿￿￿

Set “TV” or “CABLE” option to the
3 appropriate position 27 .
	TV	- VHF/UHF channels
	CABLE	- Cable TV channels

36

4 Press Direct channel selection buttons (0–￿￿9)￿￿￿or

CH +/– to select the channel to be recorded.

5 Press REC/OTR. Recording begins. Press the button again to stop recording after 30 minutes. Each additional press of REC/OTR will increase recording time as shown in the chart below, up to a maximum of 6 hours.

Press	Recording time	Press	Recording time
once	NORMAL REC	6 times	3:00
twice	0:30	7 times	4:00
3 times	1:00	8 times	5:00
4 times	1:30	9 times	6:00
5 times	2:00	10 times	NORMAL REC

The OTR and recording time ￿￿will￿￿￿￿￿

appear on the screen for about ￿4 seconds, then change to “ ”.

￿￿￿￿￿

To cancel OTR

Press STOP or turn off the power.

“ ” will appear on the screen for about 4 seconds.

Note:

If you wish to watch the DVD playback during OTR or standard recording, press VCR DVD selector to change to DVD mode and perform the DVD playback 42 .

2I30301A-En_p32-37 36 1/12/06, 17:44