Toshiba HI-FI SQPB owner manual Drc, QSound, Parental control setting, Set the new password

Function setup (DVD)

Customizing the function settings (Continued)

Setting details

DRCEMenuParental.B.L.	: OffEnglish
QSoundTVSubtitleScr Seten Password:Off4:3Eng			h
		lis
DisplayAudioO t ut	: OEInterlaceglish
Picture ModeDivX(R) :VODAuto
JPEG Interval	: 5 Seconds
Screen Saver	: On

ParentalEMenuDRC.B.L.	: OffEnglish
PasswordTVSubtitleQSoundScr en	: Cha4:3EOng		he
		nglis
OutputDisA diolay	: InterlaceOE glish
DivX(R)P cture ModeVOD	: AutoDisplay
JPEG Interval	: 5 Seconds
Screen Saver	: On

DRC

DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment.

Off:

It plays back at the recording level on the disc.

On:

Loud sound such as explosion or similar is toned down slightly when played back. This makes it suitable for when it is connected to a stereo.

Notes:

•This function works only during playback of Dolby Digital recorded discs.

•The level of Dynamic Range Reduction may differ depending on DVD video disc.

QSound

This DVD video player equipped with a “QSound”. It can produce the effect of being in a cinema or a concert hall.

Off: The QSound is disengaged.

On: The QSound operates.

Notes:

•The QSound setting can also be changed with AUDIO on the remote control ￿￿.

•This function works only when the disc recorded with Dolby Digital is played back.

•When this function works, the volume might changed.

•When the voice is distorted, turn off QSound.

62

Parental control setting

Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit.

1)Press C or D to select “Parental”, then press ENTER. “Enter Password” will appear.

2)Press “0000” using Number buttons (0–9). (Please note, this is pre-setting password of this unit). Then press ENTER. The parental level list will appear.

•Level Off: The parental control setting does not function.

•Level 8: All DVD software can be played

back.

•Level 1: DVD software for adults cannot be played back.

3)Press C or D to select from the level 1 to level 8. The limitation will be more severe as the level number is lower.

4)Press OPEN/CLOSE to activate Parental control setting.

Notes:

•Depending on the discs, the unit cannot limit playback.

•Some discs may not be encoded with specific rating level information though its disc jacket says “adult.” For those discs, the age restriction will not work.

•The password is required every time when you change the parental level.

•If you input a wrong number, press CLEAR.

Set the new password

1)Press C or D to select “Password”, then press ENTER. “Enter Current Password” will appear.

2)Press Number buttons (0–9)to input the current password (If the password has not been set yet after you purchase this unit, it is “0000”).

3)Then press ENTER. “Enter New Password” will appear. Press Number buttons (0–9)to input the new password.

4)Press ENTER. Now your new password has been set. Be sure to remember this number!

2I30301A-En_p58-63 62 1/12/06, 17:46