(8. 9) Change of DVI monitor receiver types

1Move the ÒÓ to DVI MONITOR by pushing the [MENU UP], [MENU DOWN] buttons.

2Select PC or TV by pushing the [DATA UP]-[DATA DOWN] buttons

¥ PC:

for use of PC monitor

¥ TV:

for use of monitor TV

(8. 10) Change of I/P mode

Switching between Interlace and Progressive is performed.

1Move the ÒÓ to I/P MODE by pushing the [MENU UP], [MENU DOWN] buttons.

2Select 1080p or 1080i by pushing the [DATA UP]-[DATA DOWN] buttons.

¥1080p:for use of 1080p (progressive)

¥1080i: for use of 1080i (interlace)

Note:

No image will be displayed on a monitor that is not in the correct setting mode. If this is the case, refer to the item 6.6 ÒSwitching of I/P ModesÓ to return the mode to the appropriate one (interlaced or progressive).

(8. 11) Changing RS-232C baud rate

1Move the ÒÓ to BAUD RATE by pushing the [MENU UP], [MENU DOWN] buttons.

2Select either 9600bps or 19200bps by pushing the [DATA UP], [DATA DOWN] buttons.

32