Manuals / Brands / Photography / Security Camera / Toshiba / Photography / Security Camera

Toshiba IK-HR1S 52 Gain, Note:, certain characteristics of the CMOS sensor becoming more visible

1 28

Download 28 pages, 1.4 Mb

5 2 Gain

When the image is dark even if the lens iris is open, change the gain (video gain) to get the desired video level. For gain adjustment of the unit, MANUAL (Manual), OFF (0 dB) modes are provided. Select the mode on the GAIN menu. (Refer to the item “7.3 (2) GAIN (Video gain)”.)

(1)MANUAL(Manual gain)

Gain adjustment is performed on the GAIN menu. The adjustment range is from 0 to 18dB in 1dB steps. (Refer to the item “7.3 (2) (2.1) Changing gain in MANUAL mode”.)

(2)OFF

Gain is fixed at 0 dB.

Note:

White, red, green, or blue dots may occur when the gain is increased. This is not a malfunction, just

certain characteristics of the CMOS sensor becoming more visible.

Contents

For Customer Use FCC NOTICE Following information is only for EU-memberstates: SAFETY PRECAUTIONS Disclaimer Copyright and Right of Portrait Protection of Personal Information Limitation of Usage TABLE OF CONTENTS Page 1. CAUTIONS ON USE AND INSTALLATION 2. COMPONENTS 3. NAMES AND FUNCTIONS CONNECTION 1 Standard Connection 42 Cautions on Connection 43 Connection on Rear Panel Rear panel view 4. 3A Connector Pin Assignments 5OPERATION 51 White Balance Display Meaning AWB OK AWB NG LEVEL LOW 52 Gain 6ITEMS CONTROLLED BY THE ON SCREEN DISPLAY 7MODE SETTING BY THE ON SCREEN DISPLAY 71 Using the Menus 72 Scene File 73 Menus 1SHUTTER䋨Electronic shutter䋩 (b) Changing the automatic shutter detection (ratio between peak and average value) (c) Changing the automatic shutter response speed (d) Changing the automatic shutter zone area Page 2GAIN (Video gain) 䋨3䋩 WHT BAL(White Balance) (a) Changing R PAINT (b) Changing B PAINT (c) Changing color temperature setting (d) Confirming the contents of the zone area selected by AWB 䋨3䋮2䋩 Changing the setting in ATW(Automatic Tracking White balance) mode (a) Changing R PAINT (Red offset) (b) Changing B PAINT (Blue offset) 䋨3䋮3䋩 Changing gain in MANUAL mode (a) Changing the red gain (b) Changing the blue gain 䋨4䋩 PROCESS 䋨4䋮3䋩 Changing detail (outline) gain 䋨4䋮4䋩 Changing DTL B.FREQ (detail boost frequency) 䋨4䋮5䋩 Changing master pedestal 䋨5䋩 MATRIX(Matrix color correction) 䋨6䋩 OPTION 䋨7䋩 Returning to factory settings 8. BEFORE MAKING SERVICE CALL 9.SPECIFICATIONS 10. EXTERNAL APPEARANCE DIAGRAM Limited Warranty – TOSHIBA CMOS Color Camera One (1) Year Limited Warranty of Labor and Parts Instruction Manual (Owner’s Manual): Your Responsibilities DISCLAIMERS: