8. BEFORE MAKING SERVICE CALL
| Symptom | Items to be checked |
No picture 䍃 Is power supplied correctly?
䍃Is the lens iris adjusted correctly?
䍃Are the camera and video cables connected correctly?
䍃Is the shutter mode set correctly?
䍃Is the monitor on, and in working condition?
䍃Can the monitor (that you are using) accept the
Poor color 䍃 Is the monitor adjusted correctly?
䍃Is the white balance of the camera adjusted correctly? (in modes other than automatic tracking)
䍃Is the matrix color correction set correctly?
䍃Is the illumination sufficient?
9.SPECIFICATIONS
Image sensor | 1/3 inch color CMOS sensor (Rolling shutter) |
| |
Output pixels | Horizontal : 1920, Vertical : 1080 (max) |
| |
Signal system | 1080/59.94i, 1080/50i, 720/59.94p, 720/50p |
| |
Scanning system | Progressive |
| |
Scan frequency | Horizontal : 33.716 kHz, Vertical : 59.94 Hz (1080/59.94i setting) | ||
| Horizontal : 28.125 kHz, Vertical : 50 Hz (1080/50i setting) | ||
| Horizontal : 44.955 kHz, Vertical : 59.94 Hz (720/59.94p setting) | ||
| Horizontal : 37.500 kHz, Vertical : 50 Hz (720/50p setting) | ||
Sensitivity | F 4 standard (2000 lx, 3000K) |
| |
Minimum illumination | 8 lx standard (50 IRE, F1.4, gain 18 dB, |
| |
gamma setting ON (setting value 0), 3000 K) |
| ||
|
| ||
|
|
| |
Output signal |
| ||
| 75 ohms unbalanced BNC connector |
| |
Sync system | Internal |
|
|
White balance | ATW䋨Automatic tracing white balance䋩, AWB䋨Automatic white balance䋩, | ||
MANUAL䋨Manual䋩 |
| ||
|
| ||
Gain | MANUAL (Manual), OFF (0 dB) |
| |
Scene file | A, B, C, D, E |
| |
Remote control | Serial data interface |
| |
Lens mount | C mount |
|
|
Power supply | 12V DC | 10% |
|
Power consumption | Approx. 3.5 W |
| |
Weight | Approx. 150 g (0.33 lbs) |
| |
External dimension | 44(W) × 44(H) × 78(D) mm (1.73”(W) 㩷1.73”(H) | 㩷3.07”(D) ) (excluding protrusions) | |
Operating temperature | 0 to 40 | (32 F to 104 F) |
|
Operating humidity | Less than 90% (non condensing) |
| |
Design and specifications are subject to change without notice.
26