7. LINE LOCK PHASE
When a video switcher switches two or more cameras, the picture may fluctuate on the video monitor due to the different AC line phase of each camera. In this case, adjust the V PHASE controller to get a stable image.
Line Lock V PHASE CONTROL
8. NOTE ON USE AND INSTALLATION
•Do not aim the camera at the sun
Do not aim the camera at the sun or point it at sun even if you are not shooting.
•Do not shoot intense light
Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunction.
•Treat the camera with care
Do not drop the camera or subject it to strong shock of vibration. Otherwise, the camera may malfunction.
•Never touch internal parts
Do not touch the internal parts of the camera other than the parts specified. Otherwise, the camera may malfunction.
•Do not splash water on the camera
Install the camera where the camera can be kept dry. If the camera gets wet, turn off the power and contact your dealer.
•Check the ambient temperature and humidity
Avoid using the camera where the temperature is hotter or colder than specified. Otherwise, the quality of images may deteriorate or internal parts may be affected. Special care is required to use the camera at high temperature and humidity.
•Should you notice any trouble
If any trouble occurs while you are using the camera, turn off the power and contact your dealer. If you continue to use the camera when there is something wrong with it, the trouble may much worse and an unpredictable accident may occur.
-12 -
