Toshiba IK-VR01A instruction manual Features & Description, Components

1. FEATURES & DESCRIPTION

IK-VR01A has the following features:

(1)Flush/Surface mount.

(2)IP66 Standard for dust and water resistance.

(3)Built in vari-focal lens with auto-iris Focal length 3.0~8.0mm.

(4)Incorporated 1/3" type CCD image sensor gives high resolution and excellent sensitivity

480 lines horizontal resolution

0.4 lx minimum illumination with tint dome cover

(5)50dB Signal-To Noise Ratio

(6)Power supply- AC24V or DC12V - This camera automatically detects the power.

(7)BLC, AGC, and Line-Lock (AC24V)

2. CAUTIONS

(1)Avoid touching the lens glass with your fingers. If necessary, use a soft cloth moistened with alcohol to wipe off any dust.

(2)Avoid aiming the camera at the sun.

(3)Avoid shooting the camera at intense light. Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen.

However, this is not a malfunction.

(4)Install the camera away from video noise. If cables are wired near electric lighting wires or a TV set, noise may appear in images. In this event, relocate cables or reinstall equipment.

3. COMPONENTS

(1) Camera (with Tint Dome Cover installed)		1 pc.
(2) Accessories
(a)	Mounting Base	1 pc.
(b)	Bracket	1 pc.
(c)	Screw A	3 pcs.
(d)	Screw B	3 pcs.
(e)	Clear Dome Cover	1 pc.
(f)	Special Hexangular Wrench	1 pc.
(g)	Monitor Out Harness Wire	1 pc.
(h)	Power Connector	1 pc.
(i)	Instruction Manual	1 pc.

- 3 -