Hardware Installation, Bottom Camera Dome Cover | Toshiba IK-WD14A

Hardware Installation

First, use the supplied driver to detach the dome cover from the camera base. Then, follow the steps below to install the camera; either to a ceiling or to a wall.

Bottom of the

Camera

Dome

Cover

13

Image 13

Toshiba IK-WD14A quick start Hardware Installation, Bottom Camera Dome Cover

Contents

Model IK-WD14A FCC USA-INFORMATION Introduction Terms and Trademarks Table of Contents Important Safeguards Other trouble. Replacement Parts Damage Requiring ServiceSafety Check Lightning Field Installation Marking Check the ambient temperature and humidity Keep the camera installation away from video noiseDo not aim the camera at the sun Do not shoot intense light Items needed for network camera monitoring Administrators personal computer Contents Physical Description Status LED Bottom Camera Dome Cover Hardware Installation Mounting the camera to a solid surface Cable installation When using a non-PoE switch When using a PoE-enabled switchNetwork Deployment General Connection without PoE Assigning IP Address Retrieving Images To adjust the viewing angle Adjusting the Lens Dome cover To adjust the zoom factor and focus range Adjusting the Zoom and Focus Toshiba America Information SYSTEMS, INC