Adjusting the Lens
Based on the live image retrieved from the camera, adjust the camera lens by performing the following:
To adjust the viewing angle
1.Turn the lens module left and right.
2.Loosen the tilt adjustment screws on both side of the camera and then turn the lens module up and down. Upon completion, tighten the screws.
3.Turn the lens cover to adjust the image orientation.
1
Pan 350o
Monitoring on the television
2 |
|
Tilt 81o | 3 |
|
DO NOT over rotate the lens. Doing so will damage the camera lens module
This camera is able to output an analog NTSC or PAL video signal and sound from the Audio/Video Out jack.
Adjustment of Viewing angle is possible using a portable monitor without using a personal computer when installing.
Use the included AV Out cable for this purpose.
Focus button
When adjusting the viewing angle, the camera focus may shift.
In this case, push the focus button on the camera body for 2 seconds or more. The zoom lens will move to a wide position and the focus will move to the optimal position.
NOTE
•Depending on an object's conditions, the focus may not move to the optimal position.
In this case, focus the lens manually from your personal computer.
IMPORTANT:
Zoom and Focus adjustment is made via the Remote Focus function on your web browser. There is no mechanical zoom or focus adjustment for the camera.
19
