Assigning IP Address
1.Install the "Installation Wizard" under the Software Utility directory from the CD- ROM.
2.The program will analyze your network environment. After your network is analyzed, please click on the "Next" button to continue the program.
Installation
Wizard
3.The program searches for other Network Cameras on the same network.
4.After searching, the main installer window will pop up. Click on the MAC address of the appropriate device to connect to the Network Camera.
169.254.0.99 |
0002D1714270
NOTE
•If "Installation Wizard" does not find the camera during the search, try turning off the wireless LAN of a PC.
•Installation Wizard can search the location of the Network Camera even though DHCP is not used on the network. In this scenario, assign the camera a static IP address because the IP address of the Network Camera has been assigned 169.254.*.* by default.
17
