61
Getting Started
Adding memory (optional)
5.375 x 8.375 ver 2.3
2Pull the clips away from the memory module.
The memory module pops up slightly.
3Gently lift the memory module to a 45 degree angle and
slide it out of the slot.
Sample removing the memory module
4Replace the memory module slot cover and tighten the
screws.
5Turn the computer over and restart it.
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
Checking total memory
When you add or remove a memory module, you can check
that the computer has recognized the change. To do this:
1Click Start, Control Panel, Performance and
Maintenance, and then System.
2The General tab view automatically appears and shows
total memory.
If the computer does not recognize the memory
configuration, turn off the computer, remove the memory slot
cover, and make sure the memory module is seated properly,