92 Learning the Basics
Using the DVD-ROM or multi-function drive
5.375 x 8.375 ver 2.3
8Make sure the disc is completely on the spindle and is
lying flat on the tray.
If you insert the disc incorrectly, it may jam the drive. If this
happens, contact Toshiba support for assistance.
9Push the disc tray in by pressing gently on the center of
the tray until it clicks into place.
You are ready to use the disc.
Removing a disc with the computer on
To remove a compact disc (CD or DVD) with the computer
turned on:
1Press the eject button on the drive.
Do not press the eject button while the in-use indicator light is
glowing. Doing so could damage the disc or the drive.
Also, if the disc is still spinning when you open the disc tray,
wait for it to stop spinning before you remove it.
2Pull the tray until it is fully open, remove the disc, and
place it in its protective cover.
3Gently push the tray in to close it.
Removing a disc with the computer off
1Insert a slender object, such as a straightened paper clip,
into the manual eject hole.
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.