67
Getting Started
Using optional external display devices
5.375 x 8.375 ver 2.3
3Turn on the external device.
4Set the display mode by pressing Fn + F5, or by
configuring the Display Properties settings.
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest w ay to chang e the
display output settings is to use the display hot key (Fn + F5):
1Press Fn and F5 simultaneously.
2While holding down Fn, press F5 repeatedly, pausing
between each press, until the setting you want takes
effect. Briefly pause between pressing the F5 key to allow
time for the display to change.
This hot key cycles through the settings in the following
order:
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
TV and LCD
TV only
3Release the Fn key.
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
Set the option for the video controller by clicking Start, then
Control Panel, Appearance and Themes, and then Display.
Choose the Settings tab, click the Advanced button, select
Display Device, select the applicable Monitor type, and click
Apply or OK.