Basic Operations
1.Plug one end of the modular cable into the modem jack.
2.Plug the other end of the modular cable into a telephone jack.
Do not pull on the cable or move the computer while the cable is connected.
If you use a storage device such as an optical media drive or hard disk drive connected to a
If you find that the modem speed is low or communication is interrupted when you are using the modem, set the CPU speed to Maximum within the Power Options.
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1.Pinch the lever on the connector in the telephone jack and pull out the connector.
2.Disconnect the cable from the computer in the same manner.
LAN
The computer is equipped with networking hardware that supports Ethernet LAN (10 megabits per second,
(100 megabits per second).
Do not install or remove an optional memory module while the
The
User’s Manual |