Toshiba L45 Using the optical drive, Optical drive components, hole, Drive, light, Eject, in-use, button, indicator, Eject button, Manual eject, Manual eject hole

82	Learning the Basics
	Using the optical drive

TECHNICAL NOTE: Your optical drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region. The drive will allow you to change regions four times. On the fourth change, the region will be “locked in.” That is, the drive will only play DVDs from that last region. Note that changing from region 1 to region 2 and back to region 1 is counted as two changes.

NOTE For optimum DVD performance, it is recommended that you play DVDs while running the computer on AC power.

Optical drive componentsThe optical drive is located on the side of the computer.Your optical drive may look like this:Drive in-use indicator light Eject buttonManual eject hole(Sample Illustration) Optical drive

Drive in-use indicator light—Indicates when the drive is in use. Eject button—Press to release the disc tray.

Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive.

When the disc tray is open, be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction.

Manual eject hole—Use if you need to release the disc tray when the power is off. Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole.

Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.