ProblemProcedure
You cannot access a
Make sure the drive’s disc tray is securely closed. Press gently until it clicks into place.
Open the disc tray and make sure the disc is properly seated. It should lie flat with the label facing up.
A foreign object in the disc tray could block laser light from reading the disc. Make sure there is no obstruction. Remove any foreign object.
Check whether the disc is dirty. If it is, wipe it with a clean cloth dipped in water or a neutral cleaner.
Memory Media Card
For further information, please refer to Operating Basics.
Problem | Procedure |
Memory media card | Remove the memory media card from the |
error occurs | computer and then reinsert it in order to ensure it is |
| firmly connected. |
| If the problem persists, then you should refer to the |
| documentation supplied with your memory media |
| card for further information. |
|
|
You cannot write to | Remove the memory media card from the |
a memory media | computer and check to ensure that it is not write |
card | protected. |
|
|
You cannot read a | Check to ensure the required file is actually on the |
file | memory media card that is inserted into the |
| computer. |
| If you are still unable to resolve the problem, |
| contact TOSHIBA Support. |
|
|
Pointing device
If you are using a USB mouse, you should also refer to both the USB mouse section and the documentation supplied with your mouse.
Touch Pad |
|
|
|
Problem | Procedure |
The Touch Pad does | Check the Device Select settings. |
not work. | Click Desktop Assist |
| |
| Hardware and Sound |
|
|
User's Manual |
