ProblemProcedure
Battery doesn’t power the computer as long as expected
If you frequently recharge a partially charged battery, the battery might not charge to its full potential - in these instances you should fully discharge the battery and then attempt to charge it again.
Check the Power saver option under Select a power plan in the Power Options.
Real Time Clock
ProblemProcedure
The BIOS setting and system date/ time are lost.
The lasting time of the Real Time Clock (RTC) has run out - you will need to set the date and time in the BIOS setup utility by using the following steps:
1.Click the power icon ( 
) on the Start screen and then select Restart.
2.Hold down the F2 key and then release this key one second after the computer is power on - the BIOS setup utility will load.
3.Set the date in the System Date field.
4.Set the time in the System Time field.
5.Press F10 - a confirmation message will be displayed.
6.Select Yes - the BIOS setup utility will end and the computer will restart.
Keyboard
Keyboard problems can be caused by the setup and configuration of the computer - please refer to the The Keyboard section for further information.
Problem | Procedure |
Output to screen is | Please refer to your software's documentation to |
garbled | ensure that it is not remapping the keyboard in any |
| way (remapping involves changing or reassigning |
| the function of each key). |
| If you are still unable to use the keyboard, you |
| should contact TOSHIBA Support. |
|
|
User's Manual |
