User’s Manual 4-19
Operating Basics
5. After choosing the menu template, click the Next button to go to the
Burning Page.
6. Choose the output type and then click the Burn button.
How to learn more about Corel DVD MovieFactory
Please refer to the Help and Manual files for additional Corel DVD
MovieFactory information.
■Opening the Corel DVD MovieFactory Manual
Start -> All Programs -> DVD MovieFactory for TOSHIBA -> DVD
MovieFactory User Manual
Important information for use
Note the following limitations when you write Video DVD or Blu-ray disc
Movie:
1. Editing digital video
■Log in with Administrator rights to use DVD MovieFactory.
■Make sure that your computer is running on AC power when using
DVD MovieFactory.
■Operate the computer at Full Power. Do not use power-saving
features.
■While you are editing DVD, you can display preview. However, if
another application is running. The preview might not display
properly.
■DVD MovieFactory cannot edit or play copy protected content.
■Do not enter Sleep or Hibernation Mode while using DVD
MovieFactory.
■Do not operate DVD MovieFactory immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
■When recording to a DV-Camcorder, to ensure you capture all of
your data, let the camcorder record for a few seconds before you
begin recording your actual data.
■CD recorder, DVD-Audio, mini DVD and Video CD functions are not
supported in this version.
■While recording video to DVD, please close all other programs.
■Do not run software like a screen saver because it can put a heavy
load on the CPU.
■Do not support mp3 decode and encode.
2. Before recording the video to DVD or Blu-ray disc
■When you record DVD disc or Blu-ray disc, please use only discs
recommended by the Drive manufacturer.
■Do not set the working drive to a slow device like a USB1.1 hard
disk drive or it will fail to write DVD or Blu-ray disc.
■Do not perform any of the following actions: