User’s Manual 8-10
Troubleshooting
BD drive
For more information, refer to Chapter 4, Operating Basics.
Check the type of CD/DVD you are using. The
drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD
(single/multi-session), CD-ROM
Mode 1, Mode 2, CD-ROM XA
Mode 2 (Form1, Form2), Enhanced
CD (CD-EXTRA), Addressing
Method 2
Recordable DVD: DVD-R/-R DL, DVD+R/+R DL,
DVD-RW, DVD+RW, DVD-RAM
Check the region code on the DVD. It must
match that on the DVD Super Multi drive. Region
codes are listed in the Optical disc drives section
in Chapter 2, The Grand Tour.
Problem Procedure
You cannot access
a CD/DVD/BD in the
drive
Make sure the drive’s disc tray is securely
closed.
Press gently until it clicks into place.
Open the disc tray and make sure the
CD/DVD/BD is properly seated. It should lie flat
with the label facing up.
A foreign object in the disc tray could block laser
light from reading the CD/DVD/BD. Make sure
there is no obstruction. Remove any foreign
object.
Check whether the CD/DVD/BD is dirty. If it is,
wipe it with a clean cloth dipped in water or a
neutral cleaner. Refer to the Media care section
in Chapter 4 for details on cleaning.
Some CD/DVD/BDs run
correctly, but others do
not
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software’s needs.
Check the CD/DVD/BDs documentation.