Toshiba M300 Network Boot Protocol, External Keyboard Fn key, [PXE], [RPL], Disabled, Left Alt, Left Alt, Left Alt, Left Ctrl, Right Alt, Right Alt, Caps Lock, Right Ctrl

HW Setup

3.Use the left/right cursor keys to highlight the boot device you want and press Enter.

■If a supervisor password is set only, it is the following.

■The menu above appear when you use the user password to start the computer (able to run HW Setup).

■The menu above does not appear when you use the user password to start the computer (unable to run HW Setup).

■If the supervisor and user password are set, it is the following.

■The menu above appear when you use the supervisor and user password to start the computer (able to run HW Setup).

■The menu above does not appear when you use the user password to start the computer (unable to run HW Setup).

■The menu above appear when you use the supervisor password to start the computer (unable to run HW Setup).

■The selection method above does not change the boot priority settings in HW Setup.

■If you press a key other than one of those above or if the selected device is not installed, the system will boot according to the current setting in HW Setup.

Network Boot Protocol

This feature sets the protocol to remotely boot from the network. [PXE] Sets PXE as the protocol (Default).

[RPL] Sets RPL as the protocol.

Keyboard

External Keyboard Fn key

Use this option to set a key combination on an external keyboard to emulate the Fn key on the computer’s internal keyboard. Setting an Fn key equivalent will let you use Hot keys by pressing the set combination instead of the Fn key (PS/2 keyboard only).

Disabled	No Fn key equivalent (Default).
Fn Equivalent	Left Ctrl	+	Left Alt
	Right Ctrl	+	Right Alt
	Left Alt	+	Left Shift
	Right Alt	+	Right Shift
	Left Alt	+	Caps Lock

7-4 User’s Manual