Optional Devices

USB floppy disk drive

The USB floppy disk drive module can be connected to the USB port. For details on connecting the USB floppy disk drive module, refer to Chapter 4, Operating Basics.

External monitor

An external analog monitor can be connected to the external monitor port on the computer. The computer supports VGA and XGA video modes. To connect a monitor, follow the steps below.

1.Turn the computer’s power off.

2.Connect the monitor cable to the external monitor port.

Monitor cable

External monitor port

Connecting the monitor cable to the external monitor port

3.Turn the monitor’s power on.

4.Turn the computer’s power on.

When you turn on the power, the computer automatically recognizes the monitor and determines whether it is color or monochrome.

However, the Windows Desktop appears on a display device that you used last time to shut down your computer, if the display device exists when you turn on the power.

To change the display settings, press Fn + F5. If you disconnect the external monitor before you turn the computer’s power off, be sure to press Fn + F5 to switch to the internal display. Refer to Chapter 5, The Keyboard, for details on using hot keys to change the display setting.

User’s Manual

8-11