Manuals / Brands / Computer Equipment / Computer Drive / Toshiba / Computer Equipment / Computer Drive

Toshiba MK3006GAL, MK4006GAH 11.9 Security Mode Feature Set, 11.9.1 Security mode default setting, 11.9.2 Initial setting of the user password

1 153

Download 153 pages, 671.75 Kb

11.9 Security Mode Feature Set

The Security mode features allow the host to implement a security password system to prevent unauthorized access to the disk drive.

•Following Commands are supported for this feature set .

•SECURITY SET PASSWORD

•SECURITY UNLOCK

•SECURITY ERASE PREPARE

•SECURITY ERASE UNIT

•SECURITY FREEZE LOCK

•SECURITY DISABLE PASSWORD

Parameter word for the Security mode feature set is described in IDENTIFY DEVICE response Word 128.

11.9.1 Security mode default setting

The drive is shipped with the master password set to 20h value (ASCII blanks) and the lock function disabled. The system manufacturer/dealer may set a new master password by using the SECURITY SET PASSWORD command, without enabling the lock function.

If the Master Password Revision Code feature is supported, the Master Password Revision Code is initially set to FFFEh.

11.9.2 Initial setting of the user password

When a user password is set, the drive automatically enters lock mode by the next powered-on .

Toshiba Corporation Digital Media Network Company

Page 135 of 153

© 2003, Copyright TOSHIBA Corporation All Rights Reserved

Contents

1.1.1.1.1.1.1.1 TOSHIBA MK6006GAH/MK4006GAH /MK3006GAL Revision History ＳＡＦＥＴＹ IMPORTANT MESSAGES LIMITATION OF LIABILITY USAGE RESTRICTIONS SAFETY Page TABLE OF CONTENTS Page Page Table of Figures MK3006GAL D IMENSIONS MK6006GAH/MK4006GAH D 4 P 2. SCOPE 3. GENERAL DESCRIPTION Page 4.KEY FEATURES Page 5. BASIC SPECIFICATION 6. PERFORMANCE 7. POWER REQUIREMENTS 7.1Supply Voltage 7.2 Power Consumption 7.3 Energy Consumption Efficiency 8. MECHANICAL SPECIFICATIONS 8.1 Dimension and weight 8.2 Drive Orientation 8.3 Mounting Instructions 8.3.1 Installation Figure 1 MK3006GAL Dimensions Figure 2 MK6006GAH/MK4006GAH Dimensions 9. ENVIRONMENTAL LIMITS 9.1 Temperature and Humidity 9.1.1 Temperature 9.1.2 Humidity 9.2 Vibration 9.4 Altitude 9.5 Acoustics（Sound Power） 9.6 Safety Standards EMC Adaptability 9.7 Magnetic Fields 10. RELIABILITY 10.1 Error Rate 10.1.1 Non- Recoverable Error Rate 10.1.2 Seek Error Rate 10.2 Mean Time to Failure (MTTF) 10.6 Load/Unload HOST INTERFACE 11.1 Cabling Interface Connector Cable length and capacitance DC input/output Characteristics 11.2.2.1 Input 11.2.2.2 Output 11.3 Interface connector 11.3.1 ATA interface connector 11.3.2 Pin Assignment 11.3.3 Signal Treatment 11.3.4 Series resistance 11.3.5 Signal Description I/O 11.4 Host Interface Timing 11.4.1 Program I/O Write Timing 11.4.2 Program I/O Read Timing 11.4.3 Multiword DMA Write Timing 11.4.4 Multiword DMA Read Timing 11.4.5 Ultra DMA Timing Sustained Ultra DMA data in burst Host pausing an Ultra DMA data in burst Device terminating an Ultra DMA data in burst Host terminating an Ultra DMA data in burst Initiating an Ultra DMA data out burst Sustained Ultra DMA data out burst Device pausing an Ultra DMA data out burst Host terminating an Ultra DMA data out burst Device terminating an Ultra DMA data out burst Page 11.4.6 Reset Timing 11.5 Grounding 11.6 Address Decoding 11.7 Register Description 11.7.1 Data Register 11.7.1.1 Read/Write command 11.7.1.2 Read/Write Buffer command 11.7.1.3 Format command 11.7.2 Error Register 11.7.2.1 Operational Mode 11.7.2.2 Diagnostic Mode 11.7.3 Features Register (Write Precompensation Register) 11.7.3.1 Smart command 11.7.4 Sector Count Register 11.7.4.1 Disk Access command 11.7.4.2 Initialize Device Parameters command 11.7.4.3 Power Control command 11.7.4.4 Set Features Command 11.7.5 Sector Number Register 11.7.6 Cylinder Low Registers 11.7.6.1 Disk Access command 11.7.6.2 SMART commands 11.7.7 Cylinder High Registers 11.7.8 Device/Head Register 11.7.9 Status Register 11.7.10 Command Register Command Code 11.7.11 Alternate Status Register 11.7.12 Device Control Register 11.7.13 Device Address register4 Page 11.8 Command Descriptions 11.8.1 Nop (00h) 11.8.2 Recalibrate5 (1xh) 11.8.3 Flush Cache (E7h) 11.8.4 Flush Cache EXT (EAh) 11.8.5 Read Sector 11.8.6 Read Sector EXT 11.8.7 Write Sector 11.8.8 Write Sector EXT 11.8.9 Read Verify (40h) 11.8.10 Read Verify EXT 11.8.11 Write Verify6 (3Ch) 11.8.12 Format Track 11.8.13 Seek (7xh) 11.8.14 Toshiba Specific 11.8.15 Execute Diagnostics (90h) 11.8.16 Initialize Device Parameters (91h) 11.8.17 Download Microcode (92h) 11.8.18 Read Multiple 11.8.19 Read Multiple EXT (29h) 11.8.20 Write Multiple Page 11.8.21 Write Multiple EXT (39h) 11.8.22 Set Multiple Mode (C6h) 11.8.23 Read DMA 11.8.24 Read DMA EXT 11.8.25 Write DMA (CAh/CBh) 11.8.26 Write DMA EXT 11.8.27 Power Control (Exh) 11.8.27.1 Stand-byImmediate (E0/94) 11.8.27.2 Idle Immediate (E1/95) 11.8.27.3 Stand-by(E2/96) 11.8.27.4 Idle (E3/97) 11.8.27.5 Check Power Mode (E5/98) 11.8.27.6 Sleep (E6/99) 11.8.28 Read Buffer (E4h) 11.8.29 Write Buffer 11.8.30Identify Device (ECh) Page Page Page Page Page Page Page Page Page Page Page Page Page 11.8.31 SET MAX (F9h) Set Max Address 11.8.31.2 Set Max Set Password Set Max Lock 11.8.31.4 Set Max Unlock 11.8.31.5 Set Max Freeze Lock 11.8.32 SET MAX ADDRESS EXT (37h) 11.8.33 Read Native Max Address (F8h) 11.8.34 Read Native Max Address EXT (27h) 11.8.35 Set Features (EFh) 11.8.36 SECURITY SET PASSWORD (F1h) 11.8.37 SECURITY UNLOCK (F2h) 11.8.38 SECURITY ERASE PREPARE (F3h) 11.8.39 SECURITY ERASE UNIT (F4h) 11.8.40 SECURITY FREEZE LOCK (F5h) 11.8.41 SECURITY DISABLE PASSWORD 11.8.42 SMART Function Set (B0h) SMART Read Attribute values Attribute Name Definition Self-testexecution status values Page SMART Read Attribute thresholds 11.8.42.3 SMART Enable Disable Attribute Autosave SMART Save Attribute Values SMART Execute Off-lineImmediate 11.8.42.5.2 Captive mode 11.8.42.5.3 SMART off-lineroutine 11.8.42.5.4 SMART Short self-testroutine 11.8.42.5.5 SMART Extended self-testroutine 11.8.42.5.6 SMART Selective self-testroutine Page SMART Read Log Sector SMART Log Directory 11.8.42.6.2 Summary error log sector SMART summary error log sector 11.8.42.6.2.1 Error log version 11.8.42.6.2.2 Error log data structure 11.8.42.6.2.3 Command data structure Command data structure 11.8.42.6.2.4 Error data structure Error data structure State field values 11.8.42.6.2.5 Device error count 11.8.42.6.2.6 Data structure checksum 11.8.42.6.3 Comprehensive error log Comprehensive error log 11.8.42.6.3.1 Error log version 11.8.42.6.3.2 Error log index 11.8.42.6.3.3 Error log data structure 11.8.42.6.3.4 Device error count Self-testlog data structure 11.8.42.6.4.1 Self-testlog data structure revision number 11.8.42.6.4.2 Self-testlog descriptor entry Self-testlog descriptor entry 11.8.42.6.4.3 Self-testindex 11.8.42.6.4.4 Data structure checksum 11.8.42.6.5 Selective self-testlog Selective self-testlog Read/write 11.8.42.6.5.3 Current LBA under test 11.8.42.6.5.4 Current span under test 11.8.42.6.5.5 Feature flags Selective self-testfeature flags Bit SMART Write Log Sector SMART Enable Operations SMART Disable Operations 11.8.42.10 SMART Return Status 11.8.42.11 SMART Enable/Disable Automatic Off-line 11.8.43 Read Log EXT (2Fh) 11.8.43.1 General Purpose Log Directory 11.8.43.2 Extended Comprehensive SMART Error log 11.8.43.2.3 Extended Error log data structure Extended Error log data structure 11.8.43.2.3.1 Command data structure Command data structure 11.8.43.2.3.2 Error data structure Error data structure Byte Descriptions 11.8.43.3 Extended Self-testlog sector Extended Self-testlog data structure 11.8.43.3.1 Self-testdescriptor index 11.8.43.3.2 Self-testlog data structure revision number 11.8.43.3.3 Extended Self-testlog descriptor entry Extended Self-testlog descriptor entry 11.8.44 Write Log EXT (3Fh) 11.8.45 Device Configuration (B1h) Device Configuration Restore Device Configuration Freeze Lock Device Configuration Identify 11.8.45.3.1.1 Word 0: Data structure revision 11.8.45.3.1.2 Word 1: Multiword DMA modes supported 11.8.45.3.1.3 Word 2: Ultra DMA modes supported 11.8.45.3.1.4 Words 3-6:Maximum LBA address 11.8.45.3.1.5 Word 7: Command/features set supported 11.8.45.3.1.6Words 8-254:Reserved 11.8.45.3.1.7Word 255: Integrity word 11.8.45.4.1 Error outputs Register 11.8.45.4.2 Description 11.8.45.4.2.1 Word 0: Data structure revision 11.8.45.4.2.2 Word 1: Multiword DMA modes supported 11.8.45.4.2.3 Word 2: Ultra DMA modes supported 11.8.45.4.2.4 Words 3-6:Maximum LBA address 11.8.45.4.2.5 Word 7: Command/features set supported 11.8.45.4.2.6Words 8-254:Reserved 11.8.45.4.2.7Word 255: Integrity word 11.9 Security Mode Feature Set 11.9.1 Security mode default setting 11.9.2 Initial setting of the user password 11.9.3 Security mode operation from power-on 11.9.4 Password lost 11.9.5 Command Table 11.10 Self-Monitoring,Analysis and Reporting Technology 11.10.1Attributes 11.10.2 Attributes values 11.10.3 SMART function default setting 11.11 Adaptive Power Mode Control 11.11.1 Performance Idle 11.11.2 Active Idle 11.11.3Low Power Idle 11.11.4Transition time 11.12 Reset 11.13 Drive0/Drive1 Configuration 11.14 Cache Memory 11.14.1 Cache Operations 11.14.2 Notes for write cache 11.15 Automatic Write Reallocation 12. Protocol 12.1 PIO data in commands 12.2 PIO data out commands Page 12.3 Non-datacommands Page 12.4 DMA data transfer commands 12.5 Ultra DMA Page Page 12.6 Other timings