Introduction
This guide provides information on how to perform basic maintenance tasks on the Xerox DocuPrint 96, 4635, or 180.
NOTE: You may be using the DocuPrint NPS/IPS software extension on a DocuPrint 2000 EPS system. The 2000 Series printer models are the 100, 135, 155, and 180. These printers are comparable in capabilities to the DocuPrint NPSIPS models 96, 4635, and 180.
About this guide
This guide is designed for operators whose job consists of operating each of the system components, running print jobs, solving simple system problems, and performing basic maintenance tasks, such as replenishing dry ink.
Refer to the entire list of documentation in the “Related publications” section for information on other tasks required for printing with your NPS/IPS printer.
Users should have an understanding of printer controller operations.
Before using this guide, become familiar with its contents and conventions.
Contents
This section lists the contents of this guide.
•Chapter 1, “Feeder trays,” provides information on how to load feeder trays for your DocuPrint printer.
•Chapter 2, “Output trays and bins,” describes how to unload output trays for the DocuPrint printer.
•Chapter 3, “Fuser lubricant,” describes how to refill the fuser agent reservoir, and how to replace the pressure roll wiper.
Guide to Performing Routine Maintenance | xiii |
