Toshiba MW20F52, MW24F52 owner manual Timer recording, Vcr

Timer recording

Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month.

TV/VCR

ENTER

// /

MENU

TIMER REC

Timer recording

Preparation:

•Press TV/VCR to select the TV/VCR mode.

•Load a cassette tape with the erase prevention tab intact.

•Check the time and date are correct .

Example:

Program a timer recording for 23rd day, channel 125 (Cable TV), 7:00 - 9:30 PM (Tape speed : SLP).

1 Press MENU, then press or to select option.

	TIMER REC SET
	AUTO REPEAT	OFF
	/ / / / MENU
Press or to select “TIMER REC SET”, then
2 press .	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿

￿￿￿￿￿￿￿

3 Press or to select one of the program line, then press ENTER.

4 Press or to select the date, then press .

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or crimi- nal liability.

Set the start time, end time, channel and tape
5 speed as in step 4.	￿￿		￿￿￿
Then press ENTER.				￿￿￿￿￿￿￿
		￿￿￿￿￿￿			￿￿￿￿￿￿￿
	￿		￿	￿	￿￿￿￿￿￿￿￿￿￿￿￿
Notes:	￿￿￿￿			￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
• Press to move cursor backward
for correction.
• To record from external source set	￿		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿			Recording
the channel to “L1” or “L2”.
To set the timer for another program, repeat						(VCR)
6 steps 3 to 5 to set another program.

Press TIMER REC. The TIMER REC indicator

7 will light. The Timer is programed, when the programed time is reached, the recording is automatically started.

TIMER REC To cancel timer recording, press the button again and TIMER REC indicator will go out.

Notes:

•The VCR section cannot be used while the TIMER REC in- dicator is lit. If you want to use the VCR operation, press TIMER REC to deactivate the timer.

•When the clock is not set, you cannot select “TIMER REC”. In this case, set the clock (see pages 20~22).

•After a power failure or disconnection of the power plug,all

programmed recording setting and time display will be lost upon resumption of power. In this case, reset the clock (see pages 20~22) and reprogram any timer recordings.

• If you want to correct the digits while setting, press or

until the item you want to correct, then press or to correct the desired setting.

•If programming is performed without a tape in the unit, or with a tape without an erase prevention tab, the Timer Re- cording is not possible. If a tape without an erase prevention tab is in the unit, the tape will be ejected.

41

5W70101A [E]p39-42 41 30/1/06, 2:31 PM