Other functions (VCR)
TV/VCR
Duplicating a video tape
If you connect the unit to another VCR or Camcorder, you can |
|
duplicate a previously recorded tape. Make all connections before | INPUT |
turning on the power. |
STOP
REC
SPEED
Duplicating a video tape
Preparation:
•Press TV/VCR to select the TV/VCR mode.
•Load a cassette tape with the erase prevention tab intact.
•Load a previously recorded tape into the playback VCR or Camcorder.
1 Press SPEED to select the desired tape speed SP or SLP.
It is recommended to set the Speed to
the SP mode on the recording VCR
for best results.
Press INPUT once or twice to select AUDIO/
2 VIDEO input position.
“LINE1” or “LINE2” will appear on the screen.
LINE1
LINE1: on the rear panel
LINE2: on the front panel
3 Press REC.
4 Press PLAY on the playback VCR or camcorder.
5 Press STOP when you finish after duplicating.
The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or crimi- nal liability.
Connection with second video recorder
• Select “LINE1” on step 2.
Playback VCR
To VIDEO OUT | To AUDIO (R) OUT |
Audio/Video cable (not supplied) | To AUDIO (L) OUT |
Recording VCR |
|
|
To VIDEO IN
To AUDIO (R) IN
To AUDIO (L) IN
Connection with Camcorder
• Select “LINE2” on step 2.
Playback Camcorder 
Recording VCR
To AV Jack
Illustration of MW20F52
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN | Audio/Video cable (not supplied) |
For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.
Other functions (VCR)
43
5W70101A | 43 | 30/1/06, 2:31 PM |
