Toshiba NB 100 USB mouse, Enter, Enter, Problem, Problem, Buttons, Procedure, Procedure, Pointer Options, Other Hardware, select the Mouse icon

NB 100 Series

Problem	Procedure
When the reaction of	Adjust the touch Sensitivity.
touchpad is sensitive to	1.	Open the Control Panel.
slow	2.	Click the Printers icon and Other Hardware
		icon.
	3.	Click the Mouse icon.
	4.	Click the Device Setting tab.
	5.	Click the Setting button.
	6.	The Properties for Synaptics touchpad on
		PS/2 port screen appears. Double-click
		Sensitivity in the Select an item section on
		the left side of the screen.
	7.	PalmCheck and Touch Sensitivity are
		displayed. Click Touch Sensitivity.
	8.	Move the slide bar for Touch Sensitivity to
		make an adjustment. Click the OK button.
	9.	Click the OK button on the Device Setting
		tab.

If problems persist, contact your dealer.

USB mouse

This section applies only with Windows XP operating systems.

Problem	Procedure
On-screen pointer does	The system might be busy. If the pointer is
not respond to mouse	shaped as an hourglass, wait for it to resume its
operation	normal shape and try again to move it.
	Make sure the mouse is properly connected to
	the USB port.
Double-clicking does	Try changing the double-click sped setting in the
not work	mouse control utility
	1. Open the Control Panel and Printers and
	Other Hardware, select the Mouse icon
	andpress Enter.
	2. Click the Buttons tab.
	3. Set the double-click speed as instructed and
	click OK.
The mouse pointer	Try changing the speed setting in the mouse
moves too fast or too	control utility.
slow	1. Open the Control Panel and Printers and
	Other Hardware, select the Mouse icon
	andpress Enter.
	2. Click the Pointer Options tab.
	3. Set the speed as instructed and click OK.

9-8 User’s Manual