Place the Monitor on the floor or on a sturdy platform in a location where light does not directly hit the screen.
Place the Monitor far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating,
which may damage the Monitor.
Caution :
When using the back stand, please be careful since in some angles, the Monitor may fall over to the front.
When using the back stand , please be careful not to catch your fingers between the folding stand. It may cause you
unnecessary injury
If you haven’t connected electronic equipment before, or you have been frustrated in the past, you may wish to read this
section. (Cables are not supplied.)
Audio cables are usually color coded according to use: red and white for audio. The red audio cable is for the stereo
right channel, and the white audio cable is for the stereo left (or mono) channel. If you look at the rear panel of the
Monitor, you will see that the terminals are color coded in the same manner as the cables.
S-video cables provide better picture performance than standard video cables. S-video cables can only be used with
S-video compatible components.
BNC cable pro vides bette r connect ion and pic ture perfo rmance.
.
7
NOTE:
To prevent equipment damage,
Do not plug in any power cords until you have
finished connecting all equipment.
Audio Cable
S-Video cable
BNC video cable