Names and Functions of Controls <Remote control>
Power on / Power off | OSD control Menu button |
Menu Left | Menu Right |
Menu Up | Menu Down |
Activate selection | One level up |
Auto adjustment | Input source selection |
| |
Picture in picture | PIP picture switch |
Battery Installation
(2)
(1)
(3)
To replace battery inside
Push down a little as (1) in the picture and pull the back cover
Replace with the new battery as (2), 1 piece Lithium battery (CR2032) make sure the polarity of battery is correct.
3)Place back cover and slide it is as (3) in the picture.
4)Used battery need to follow the city rule to discard.
5)Avoid keeping used, old battery inside the remote control, causing leakage of internal liquid resulting metal rust or fatal damage to the remote control hand unit.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used battery according to the instructions.
Effective range
• Point the remote control at remote sensor on LCD monitor.
About the remote control
•Do not drop, shake or bump.
•Do not wet, do not place on wet materials.
•Do not dismantle.
•Do not place in locations exposed to high temperature or high humidity levels.
12
