Make sure that your computer is running on AC power while using CyberLink MediaShow.

Operate the computer at Full Power. Do not use power-saving features.

CyberLink MediaShow cannot edit or play copy-protected content. Do not enter Sleep or Hibernation Mode while using CyberLink MediaShow.

Do not operate CyberLink MediaShow immediately after turning on the computer. Please wait until all Disc Drive activity has stopped.

Do not run software like a screen saver because it can put a heavy load on the CPU.

DVD-VR format is not supported.

Before recording DVD-Video, AVCHD or Blu-ray Disc™

When you record DVD-Video, AVCHD or Blu-ray Disc™, please use only discs recommended by the Drive manufacturer.

The following types of discs are supported for recording: DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL & DVD+RW

BD-R, BD-R DL, BD-RE & BD-RE DL

Do not set the working drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD-Video, AVCHD or Blu-ray Disc™.

Do not perform any of the following actions:

Operate the computer for any other function, including using a mouse or Touch Pad, or closing/opening the display panel.

Bump or cause vibration to the computer.

Use the Mode control button and Audio/Video control button to reproduce music or voice.

Force eject the optical drive when burning.

Install, remove or connect external devices, including memory media cards, USB devices, external displays, optical digital devices.

VCD and SVCD format for output is not supported.

About recorded DVD, AVCHD and Blu-ray™ discs

Some DVD-ROM drives for personal computers or other DVD players may not be able to read DVD-R/DVD+R/DVD-RW/DVD+RW/DVD- RAM discs.

When playing your recorded DVD on your computer, please use

TOSHIBA VIDEO PLAYER.

When playing your recorded Blu-ray Disc™ on your computer, please use the TOSHIBA Blu-ray Disc Player.

If you use an over-used rewritable disc, the full formatting might be locked. Please use a brand new disc.

User's Manual

4-26