Chapter 4 Replacement Procedures
4.3 HDD Removing a HDD-H9.5mm
The following describes the procedure for removing the HDD (See Figure 4-3-1 to 4-3-3).
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause
data loss or damage to the device.
1. Turn the computer upside down.
2. Remove the following screws with a T6-bit TORX securing HDD slot cover and
remove HDD slot cover.
M2.04.0U FPH(T6) screw x2
3. Remove the following screws securing the HDD assembly.
M2.04.0F FLAT BIND screw x4
4. Disconnect the HDD assembly from the connector on the HDD cable
MAIN HDD
Figure 4-3-1
Turn
the computer upside down
Satellite T110D / Satellite Pro T110D / PORTEGE T110DMaintenance Manual (960-Q08) 11