Chapter 4 Replacement Procedures
4.6 Wireless LAN card and Bluetooth Module Removing a Wireless LAN card
The following describes the procedure for removing a Wireless LAN card (See Figure 4-6-1).
1. Disconnect the wireless LAN antenna cable from the connectors on a wireless
LAN card.
2. Open the left and right latches holding a wireless LAN card and remove a wireless
LAN card from the connector on the system board.
Figure 4-6-1 Remove a wireless LAN card
Installing a Wireless LAN card
The following describes the procedure for installing a Wireless LAN card.
1. Insert a wireless LAN card terminal slantwise into the connector on the computer
and press a wireless LAN card into latches.
2. Connect the wireless LAN antenna cable to the terminals on a wireless LAN card.
3. Put the wireless LAN antenna cable on the right location from the guide.
Satellite T110D / Satellite Pro T110D / PORTEGE T110DMaintenance Manual (960-Q08) 20