Chapter 4 Replacement Procedures
4.9 Top Cover Assembly Removing the top cover assembly
The following describes the procedure for removing the top cover assembly (See Figure 4-9-
1 to 4-9-4).
1. Turn over the computer.
2. Remove the following screws securing the cover assembly from the back and bottom
of computer.
M2.02F FLAT BIND screw x3
M2.03F FLAT BIND screw x2
M2.04F FLAT BIND screw x9
M2.06F FLAT BIND screw x3
M2.58F FLAT BIND screw x2
Figure 4-9-1 Remove the screws (back)
3. Disassemble KB Holder and KB (See Figure 4-5-1 to Figure 4-5-2)
Satellite T110D / Satellite Pro T110D / PORTEGE T110D Maintenance Manual (960-Q08)
31