Chapter 4 Replacement Procedures
4.10 Touch Pad Removing the touch pad
The following describes the procedure for removing the touch pad (See Figure 4-10-1 to 4-
10-3).
1. Disconnect the touch pad board FFC, touch pad FFC from the connector on the touch
pad board.
2. Remove the following screws securing the touch pad plate.
M2.0x2F FLAT BIND screw x8
3. Remove the touch pad board and touch pad plate, disconnect the touch pad FFC from
the connector on the touch pad.
4. Peel off and remove the touch pad from the top cover assembly.
Figure 4-10-1 Remove the touch FFC cable
Satellite T110D / Satellite Pro T110D / PORTEGE T110D Maintenance Manual (960-Q08)
35