75
Getting Started
Using external display devices
Some modes are only available with the appropriate
device attached and turned on.
The quickest way to change the display output settings is to
use the ( ) + P keys:
Press the ( ) + P keys repeatedly until the setting you want
takes effect. Briefly pause each time you press the ( ) + P
keys to allow time for the display to change.
This cycles through the settings in the following order (the
last two options are available if an external monitor is
connected):
❖PC screen only
❖Duplicate
❖Extend
❖Second screen only
(Sample Image) Display options window
The ( ) + P keys navigate through the options without
activating a selection. Press ENTER to activate a
selection.
You may also use the Fn + F5 key, and then press ENTER
to activate a selection.
NOTE
NOTE
NOTE