HW Setup & BIOS Setup

LCD Display StretchSelect the display function of the computer's display panel.

Enabled

Display modes with low resolution are stretched

 

and displayed (Default).

Disabled

Display modes with low resolution are not

 

stretched and displayed in their original state.
Security controller

Please note that the security controller settings are available on the second page of the BIOS setup application.

TPM

This setting enables or disables the computer's Trusted Platform Module (TPM) security controller.

Enabled

Enable Trusted Platform Module security.

Disabled

Disable Trusted Platform Module security

 

(default).
Clear TPM Owner

This setting is used to erase the data stored as part of the Trusted Platform Module, as would be required, for example, when disposing of the computer or when the owner of the computer changes. Once this operation is carried out, the Trusted Platform Module configuration settings are erased such that any encrypted data can no longer be decrypted and the files can no longer be read. In view of this you must ensure that you backup or delete the data as necessary before carrying out this operation.

The procedure to follow is as detailed below:

1.Move the cursor to the Clear TPM Owner setting and press either the Space key or BACK SPACE key.

2.A message is displayed at which you should press the Y, E, S, and ENTER keys in sequence - the Trusted Platform Module information will then be erased.

3.The Trusted Platform Module setting will then change from being Enable to Disabled and the setting no longer displayed.

When using TPM, please refer to the Infineon TPM Installation Guide from the C:\TOSAPINS\Infineon TPM Installation Guide and ensure that the user reads as it contains usage information and notes on using TPM security.

User’s Manual

7-12