Toshiba r500 menu, mode, Page, Click, Click, Select, in the, Mark the, Click the, check box, to launch, to invoke, Data Verification, When you back up a, Data Disc

Operating Basics

■When you back up a DVD disc, be sure that the source drive supports recording to DVD-R, DVD-RW, DVD+R or DVD+RW media - if this is not the case then the source disc might not be backed up correctly.

■When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW disc, be sure to use the same type of disc.

■You cannot partially delete any data written to a CD-RW, DVD-RW or DVD+RW disc.Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD you should follow the steps below before you begin the write/rewrite process:

1.Display the setting dialog box by one of the following two steps:

■Click the Recording settings button ( ) for writing on the main toolbar in the Data Disc mode.

■Select Settings for Each Mode ->Data Disc in the Settings menu.2.Mark the Verify written data check box.3.Select File Open or Full Compare mode.4.Click the OK button.How to learn more about TOSHIBA Disc CreatorPlease refer to the Help files for additional TOSHIBA Disc Creator information.When Using Ulead DVD MovieFactory® for TOSHIBAHow to make a DVD-Video

Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder:

1.Click Start ->All Programs ->DVD MovieFactory for TOSHIBA ->Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory.

2.Insert a DVD-RW or DVD+RW disc in Burner.

3.Click Video Disc ->Burn Video to Disc to launch Direct Recording dialog box, choose DVD-Video/+VR to invoke Straight Capture to Disc Page.

4.Choose DVD-Videoformat.5.Choose the capture source is DV.6.Press Capture button.

User’s Manual 4-18