R850/R840/R830
ProblemProcedure
You cannot access a Make sure the drive’s disc tray is securely closed.
disc in the drive. | Press gently until it clicks into place. |
|
|
| Open the disc tray and make sure the disc is |
| properly seated. It should lie flat with the label |
| facing up. |
|
|
| A foreign object in the disc tray could block laser |
| light from reading the disc. Make sure there is no |
| obstruction. Remove any foreign object. |
|
|
| Check whether the disc is dirty. If it is, wipe it with |
| a clean cloth dipped in water or a neutral cleaner. |
| Refer to the Media care section in Chapter 3 for |
| details on cleaning. |
|
|
For further information, please refer to Chapter 3, Operating Basics.
Problem | Procedure |
Memory media card | Remove the memory media card from the |
error occurs | computer and then reinsert it in order to ensure it is |
| firmly connected. |
| If the problem persists, then you should refer to the |
| documentation supplied with your memory media |
| card for further information. |
|
|
You cannot write to | Remove the memory media card from the |
a memory media | computer and check to ensure that it is not write |
card | protected. |
|
|
You cannot read a | Check to ensure the required file is actually on the |
file | memory media card that is inserted into the |
| computer. |
| If you are still unable to resolve the problem, |
| contact TOSHIBA Support. |
|
|
For further information, please refer to Chapter 3, Operating Basics.
User's Manual |