9 MAINTENANCE

Before maintenance, be sure to turn off the leakage breaker.

Cleaning of air filter

• If is displayed on the remote controller, maintain the air filter.

Clogging of the air filter reduce cooling/heating performance.

Cleaning of panel and air filter

Suction grille

Preparation :

 

1.

Turn off the air conditioner by the remote controller.

 

2.

Open the suction air port.

Button

 

 

Slide the button of the suction air port inward, and open the suction port slowly while holding it.

Clean the panel and air filter with water:

Wipe down the panel and air filter with a sponge or towel moistened

with a kitchen detergent. (Do not use any metallic brush for cleaning.)

• Carefully rinse the panel and air filter to wash out the detergent.

Suction grille

After rinsing the panel and air filter with water, dry it in the shade.

3. Close the suction air port.

• Close the suction air port, slide the button outward, and fix the

Button

 

suction port securely.

 

CAUTION

Do not start the air conditioner while leaving the panel and air filter removed.

Push the filter reset button. ( indication will be turn off.)

Cleaning of Air Filters

If the air filters are not cleaned, it not only reduce the cooling a performance of air conditioner but causes a failure in the air conditioner such as water falling in drops.

Preparation :

Strap to prevent falling

1.

Stop the operation by remote controller.

Air filter

2.

Dismount the air filter.

 

Use a vacuum cleaner to remove dust from the filters or wash them with water.

Push

After rinsing the air filters with water, dry them in the shade.

Set the air filter into the air conditioner.

Cleaning of discharge flap

The discharge flap can be removed to clean.

1. Remove the discharge flap.

Holding the both ends of the discharge flap, remove the flap sagging the center downward.

2. Cleaning with water

1 Insert

If the dirt is terrible, clean the flap by tepid

water with neutral detergent or water.

3. Mount the discharge flap.

• First push in one side of the flap, and then insert the other side sagging the center downward.

Be careful to the direction of the flap when mounting.

2Insert in the flap sagging down the center downward.

Mount the flap so that the side with the mark faces upward and the arrow direction of the mark directs.

46

Page 49
Image 49
Toshiba RAV-SM1400UT-E, RAV-SM1100UT-E service manual Maintenance

RAV-SM1400UT-E, RAV-SM1100UT-E specifications

Toshiba has consistently been recognized for its commitment to innovation and quality in the HVAC market, and the RAV-SM1100UT-E and RAV-SM1400UT-E models exemplify this dedication. These inverter air conditioners are designed to provide efficient cooling and heating solutions for diverse applications, ensuring comfort in both residential and commercial spaces.

One of the standout features of the RAV-SM1100UT-E and RAV-SM1400UT-E is their advanced inverter technology. This technology allows the units to adjust their cooling and heating capacities based on the real-time conditions, leading to significant energy savings compared to traditional fixed-speed systems. The inverter allows for smooth operation at varying speeds, reducing energy consumption while maintaining a consistent indoor climate.

Both models offer exceptional efficiency ratings. With a high energy efficiency ratio (EER) and seasonal energy efficiency ratio (SEER), these units are designed to operate sustainably while delivering powerful performance. The RAV-SM1100UT-E offers a cooling capacity of 11 kW, while the RAV-SM1400UT-E boasts a more robust 14 kW, making them suitable for a range of spaces from smaller offices to larger commercial properties.

Another significant characteristic is their quiet operation. Toshiba has engineered these units to minimize noise levels, ensuring a tranquil environment. This is particularly beneficial in settings like hotels, restaurants, and workplaces where noise can be disruptive.

The RAV-SM series is also equipped with intelligent control technology. This feature allows users to manage the system from anywhere using a smartphone app, providing convenience and flexibility. Integration with smart home systems further enhances usability, making it easy to program schedules and adjust settings remotely.

Additionally, both models employ a variety of robust filtration systems, ensuring that the circulated air is clean and healthy. With filters that capture dust, allergens, and other particles, these units contribute to improved indoor air quality.

Durability is another hallmark of Toshiba's design philosophy. These air conditioners are built with high-quality materials, ensuring long-lasting performance and reliability even in demanding environments. The RAV-SM models are also designed to work efficiently in low outdoor temperatures, extending their usefulness throughout the year.

In summary, the Toshiba RAV-SM1100UT-E and RAV-SM1400UT-E air conditioners represent a fusion of innovation, efficiency, and user-centric design. With their advanced inverter technology, energy efficiency, quiet operation, intelligent controls, and durable construction, they stand as ideal solutions for those seeking effective climate management in their spaces.