FILE NO.
No. | Part name | Procedures | Remarks |
2 | Front panel | 6) Remove both side hooks and remove the | Hook |
|
| Front panel by turn to air inlet part |
|
|
| direction. |
|
<How to install the Front panel>
| 1) | In case of the Drain hose installation |
|
|
| through the Front panel, install the opening |
|
|
| base for piping in the Back body by a screw |
|
|
| (M4 x 12). Prepare it by yourself. |
|
| 2) | Fit the Front panel in the Drain pan. Then |
|
|
| fix it in the Drain pan with 2 hooks in the |
|
|
| center of the air outlet. |
|
| 3) | Fix 5 hooks around the Front panel with |
|
|
| conformation the |
|
|
| the Back body. |
|
| 4) | Fix 8 screws and close 3 Cap screws. |
|
| 5) | Install the Drain band into the Front panel. |
|
| 6) | Check the gap between the Front panel |
|
|
| and the Back body. | |
|
|
| |
3 Drain pan | <How to remove the Drain pan> |
| |
assembly | 1) | Remove the Air inlet grille and the Front |
|
|
| ||
|
| panel. (1, 2) |
|
| 2) | Remove the Louver motor from the Drain |
|
|
| pan. |
|
3) | Remove the shaft of Horizontal louver. | Louver motor |
| |
Electrical wire | LED base | |||
4) | Remove the LED base and Electrical wire. | |||
|
|
|
| Shaft of Horizontal lover | |
5) | Remove the TA sensor wire. | Drain hose | TA sensor |
6) | Remove the Drain hose. |
|
|
(Continue)
– 29 –
