4.29 Hinge 4 Replacement Procedures
4.29 Hinge Removing the Hinge
To remove the hinge, follow the steps below and refer to Figure 4-44.
1. Remove the following screw securing the left hinge. (Front of the cover assembly)
• M2.5×4B FLAT HEAD screw ×1
2. Turn over the cover assembly and remove the following screw and left hinge.
• M2.5×6C Tapping screw ×1
3. Remove the following screw and right hinge while releasing two hooks.
• M2.5×6C Tapping screw ×1
M2.5×6C Tapping
Hinge (left)
Hook
M2.5×6C Tapping
M2.5×4B FLAT HEAD
Hinge (right)
Figure 4-44 Removing the hinge
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 4-71