Toshiba SD-240ESE Stop Play Pause Menu Enter Top Menu, To obtain a higher quality picture, About

2, 4 1

STOP

PLAY

PAUSE

MENU

ENTER

TOP MENU

To obtain a higher quality picture

Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this DVD video player, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.

About

The icons on the heading bar show the playable discs for the function described under that heading.

: You can use this function with DVD video discs. : You can use this function with VIDEO CDs.

CD : You can use this function with audio CDs.

To pause playback (still mode)

Press PAUSE/STEP during playback.

To resume normal playback, press the PLAY button.

•The sound is muted during still mode.

To stop playback

Press STOP.

To turn the power off (To enter the standby mode)

Press POWER button to turn the ON/STANDBY indicator to red.

Note

Be aware that this equipment is still powered even after the ON/STANDBY indicator turns red (standby mode) by pressing the POWER button. To disconnect this equipment completely from the mains power, pull out the power plug from the wall outlet.

Basic playback

To remove the disc

Press OPEN/CLOSE.

Remove the disc after the disc tray opens completely.

Be sure to press the OPEN/CLOSE button to close the disc tray after you remove the disc.

Notes

About the screen saver

If you pause a picture of a DVD video disc and leave it still for a long while, the screen saver of the DVD video player automatically appears. To turn off the screen saver, press the PLAY button.

Automatic Power Off function

If the DVD video player is stopped, or the screen saver is engaged for approximately 20 minutes, the DVD video player will automatically turn itself off.

•Do not move the DVD video player during playback. Doing so may damage the disc.

•Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the DVD video player to malfunction.

•Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video player to malfunction.

•In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the STOP button on your remote control once the movie is completed.

27