Toshiba SD-240ESE Connecting to a TV Using the SCART socket, To VIDEO, To audio, input, To AV

Connections

Connecting to a TV

Connect the DVD video player to your TV.

For details of output sound, see 43 .

Connecting to a TV (Using the SCART socket)

Normal TV

To SCART input

SCART cable

• Make the following setting.

To AV	On-screen display	Select:	Page
	“Video Output”	CVBS	52 56
		RGB
		* YUV

* Depends on your TV capability.

Connecting to a TV (Using the phono type jacks)

Normal TV

		To VIDEO
To audio	To audio	OUT
input	input	(yellow)
	(yellow)	Audio cable

Notes

To 2ch AUDIO OUT (R: red, L:white)

• Make the following setting.

On-screen display	Select:	Page
“Digital Out”	“PCM” or “Raw”		57
		52
“Video Output”	CVBS	52	56
	RGB
	* YUV

* Provided Progressive scan off.

•Refer to the owner’s manual of the connected TV as well.

•When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

•If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable adapter (not supplied) and then connect to your TV.

•Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected.

•Analog audio out will not have sound if DTS playback is selected.

18