DIGITAL OUT

Connecting the FM and AM(MW/LW) Antennas

Connecting the Optical Equipment

1

2

3

If AM reception is

 

 

 

poor, connect an

 

 

 

outdoor AM

antenna(not supplied).

AM Loop Antenna

(supplied)

ANTENNA

If FM reception is poor,

connect an outdoor FM antenna (not supplied).

FM Antenna (supplied)

Snap the tabs on the loop into the

 

slots of the base to assemble the

 

AM loop antenna.

External Digital

Components

For connection to external equipment with digital output.

Example: CD recorders, MD (Mini Disc) D/A converters or other components equipped with digital output jacks

(not supplied)

Optical Cable

TV

To view pictures from external input (AUX 1 , AUX 2 ), first connect the

VIDEO IN VIDEO IN jack and then connect the VIDEO OUT jack.

CONNECTIONS

 

Cooling fan (See “About Cooling Fan” below.)

FM antenna connection

 

 

AM(MW/LW) antenna connection

 

 

 

 

 

 

Audio Cable (Red/White)

 

 

If the external analog

 

Video Cable (Yellow)

component has only one

 

output jack, you may connect

 

 

either L or R.

 

 

External Analog

Components

1.Connect the FM antenna supplied to the FM 75 COAXIAL terminal as temporary measure.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

If reception is poor, connect an outdoor antenna. Before attaching a 75 coaxial cable (with a standard type connector), disconnect the supplied FM antenna.

1.Connect the AM loop antenna supplied to the AM and terminals.

2.If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).

R

L

VIDEO OUT

Connect to external equipment with analog output.

Example: VCR, TV, etc.

Warning Always connect the video and audio connection cables to the equivalent colored jack.

To Play External Digital/Analog Equipment

(About the cooling fan)

 

For safety, observe the following carefully.

 

 

A cooling fan is mounted on the rear panel of the center unit to

• Make sure there is good ventilation around the center unit. Poor

prevent abnormal temperature inside the center unit, thus assuring

ventilation could overheat and cause damage.

normal operation. The cooling fan automatically starts rotating to

• DO NOT block the cooling fan and the ventilation openings or

supply external cool air to the inside of the center unit when the

holes. (If they are blocked by a newspaper or cloth, etc., the heat

internal temperature exceeds the specified limit.

may not be able to escape.)

 

 

 

Press AUX on the remote control to select DIGITAL IN, AUX1, or AUX2. Press Function on the main unit to select DIGITAL IN, AUX1, or AUX2.

Each time the button is pressed the mode switches as follows: FM AM DVD/CD DIGITAL IN AUX 1 AUX 2.

11

12

Page 7
Image 7
Toshiba SD-43HT FM antenna connection, AMMW/LW antenna connection, Audio Cable Red/White, About the cooling fan