Listening to the radio
Preset the radio stations first as described on page 36.
1 Press DVD/FM/AM to select FM or AM.
Press PRESET + or – to select the desired
2 position number.
Reception of RDS (Radio Data System) stations
RDS (Radio Data System) is a system gradually being introduced on FM in many countries, where by an inau- dible stream of data is transmitted in addition to the nor- mal radio signal. This data contains various information including station/transmitter identification, traffic informa- tion and a list of alternative frequencies for the radio sta- tion being received.
1 Press DVD/FM/AM select FM.
You can also select the desired position num- ber using the number buttons
ENTER.
•For example, to select the preset position number 7, press 0 and 7, then press ENTER. To select the preset position number 25, press 2 and 5, then press ENTER.
Adjust the volume by rotating Volume knob on
3 the front panel or VOL +/– on the remote con- trol.
Select a desired station by pressing the PRE-
2 SET + or –.
When the RDS transmission is received, the RDS indicator appears on the display window.
Press RDS.
3 The programme service name (PS) appears on the display window.
•To make the programme service name (PS) disappear, press RDS again.
Note:
RDS is only available for FM reception.
37
