Toshiba SD-K530SU owner manual Connections Continued, Preparation, Digital Multi-channelsound

Connections (Continued)

Optional, Preferred TV Connections

Note

Rear of DVD+VCR

You can ONLY listen to DVD playback using COAXIAL

(X), OPTICAL (O) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.)

Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround

Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A1, A2) supplied.

A1 A2

X

PREPARATION

O

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

1	Connect one of the DVD+VCR’s DIGITAL AUDIO
	OUT jacks (OPTICAL O or COAXIAL X) to the cor-

responding in jack on your amplifier. Use an option- al digital (optical O or coaxial X) audio cable.

2 You will need to activate the DVD+VCR’s digital output. (See Digital Audio Output on page 19).

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD+VCR (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.

Notes

–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

–Six Channel Digital Surround Sound via digital con- nection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.

–To see the audio format of the current DVD in the on- screen display, press AUDIO.

L	R	COAXIAL	OPTICAL
AUDIO INPUT		DIGITAL INPUT

Amplifier (Receiver)

Accessory Audio/Video (A/V) Connections to

DVD+VCR

Connect the VCR IN LINE 1 or LINE IN 2 jacks on the DVD+VCR to the audio/video out jacks on your accessory component, using the optional audio/video cables.

13