Before Operation - VCR Part (Continued)
Setting the VCR Setup Menu
1 Press VCR MENU and the MAIN menu will appear.
2 Press v/V to select the SETUP menu, then press
ENTER.
The SETUP menu will appear.
3 Press v/V to choose a desired option on the SETUP menu. Then press b/B to choose a desired setting.
FUNCTION OSD
The
FUNCTION OSD can be switched between ON and OFF by pressing b/B.
AUDIO MODE
The DVD+VCR has two separate audio playback systems, the high quality VHS
AUDIO MODE can be switched between
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the DVD+VCR automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position. For normal operation, the display should be in the STEREO posi- tion. The DVD+VCR will then record a STEREO program when available, and record a mono program IF the program is NOT IN STEREO.
For weak STEREO and/or SAP broadcasts, changing the dis- play to mono may give clearer sound.
BROADCAST TYPE can be switched among STEREO, SAP, and MONO by pressing b/B.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE
This display setting should normally be left in the stereo posi- tion, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.
AUDIO OUTPUT can be switched among STEREO, LEFT, and RIGHT by pressing b/B.
4 Press VCR MENU when finished.
Channel Selection
This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels
Preparation:
Connect the DVD+VCR to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD+VCR on page 11.
AUTO CHANNEL PROGRAMMING
1 Press VCR MENU and the MAIN menu will appear.
2 Press v/V to select the TUNING menu, then press ENTER.
The TUNING menu will appear.
3 Press V to choose the SOURCE SELECT option, then press b/B to select TUNER.
Press b/B repeatedly to switch among TUNER, LINE1 and LINE2.
4 Press v/V to choose the AUTO CHANNEL SET option, then press b/B to set the channel.
•The tuner will automatically cycle through all available channels (TV/CATV) in the area and place them in the tuner’s memory.
•After the AUTO CHANNEL SET is complete, the TUN- ING menu will hide and return to the TV screen automat- ically.
5 Make sure the TUNING BAND is set appropriate- ly (TV or CATV).
•TV : If you are using a standard antenna to receive channels.
CATV : If you are using basic cable to receive channels.
•Change the setting of TUNING BAND to check the TV channels.
6 Use CH/TRK
TO ADD OR ERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels from memory manually. In order to add or erase the chan- nels, the SOURCE SELECT must be set to TUNER.
1Press V to choose the CH. ADD/DEL option on the TUNING menu. Press b/B to select a channel to add or erase.
2Press ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase more chan- nels.
3Press VCR MENU to return to the TV screen.
PREPARATION
15