Additional Operation
One Touch Replay
Press INSTANT REPLAY during playback and the disc will reverse picture search through 10 seconds of play- back. And then the playback will start from the point again.
Screen Saver
A screen saver image appears when you leave the DVD Player in stop mode for about five minutes.
Video Mode Setting DVD
With certain discs, the playback picture may be flick- ering or Dot Crawl is shown on straight lines. That means Vertical interpolation or
To change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until pic- ture quality is improved.
Video mode sequence:
Auto → Film → Video → Auto
If you turn off the power, the video mode will return to initial default state (Auto).
Detailed Description of each Video Mode
Auto : The source material of the DVD video (film material or video material) is determined from disc information.
Film : Suitable for playing film based content or video based material recorded by the progressive scan method.
Video : Suitable for playing video based content with comparatively little motion.
Note
The video mode setting only works when the Progressive Scan mode is set to “On” on the setup menu.
OPERATION
35