Toshiba SD-P2800SE owner manual Connecting to a TV or audio system, Connections

Connections

Connecting to a TV or audio system

Connect the player to your TV or audio system.

For details of output sound, see 40 .

Connecting to a TV

To S VIDEO OUT

If the TV has an S video input, connect the player with an S video cable. When using an S video cable, do not connect the yellow video cable.

		Signal flow
	To AV OUT
		(red)
Audio/video	To audio inputs	TV or monitor with
cable (supplied)		(white) audio/video inputs

To video input (yellow)

S video cable (not supplied)

• Make the following setting.			To S video input
On-screen display	Select:	Page
“Digital Out”	“Analog 2ch”	46
		50
“AV-OUT”	“CVBS/S-VIDEO”	48
		55

Notes

•Refer to the owner’s manual of the connected TV as well.

•When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

•Connect the player directly to your TV. If you connect the player to a VTR, TV/VTR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected.

To switch LCD screen / Memory Card / AV-IN

Select a mode other than AV-IN to output to an external device connected to the player.

Press MODE button on the player.

Each time the button is pressed, the

LCD will change as below.

Normal

Memory Card

Normal:	Outputs video and audio to the LCD
	of the player only.

Memory Card: To switch to the Memory Card mode.

AV-IN:	Inputs video and audio from an
	external device such as a VTR
	connected to the LCD of the player,
	thus allowing you to view video on
	the LCD of the player.

Notes

•Normal will be set the next time the player is turned on even if you turn the power of the player off while AV-IN is set.

AV-IN

54