Toshiba SD-P2800SE Connecting to Headphones, Viewing Pictures From Connected Video Equipment

Connections

Connecting to Headphones

You can listen to movies and music privately by

connecting headphones.

Headphone (supplied)

To(headphone) jack

Connect either of these jacks. To use 2 pairs of headphones at the same time, use commercially-available headphones for the other jack.

CAUTION

When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage.

Connecting headphones

Connect headphones to the headphone jack using a stereo mini plug.

Before connecting, temporarily turn down the volume with the headphone volume control. Readjust to your preference when playback starts.

•Turn off the player before you connect or disconnect the headphone cable. Possible shakes produced by plug connecting/disconnecting may cause damage to the disc.

•You can connect up to 2 headphones.

Viewing Pictures From Connected Video Equipment

You can use the LCD of this player to monitor pictures of video equipment connected via the AV IN jack.

To select the external AV input mode, press the MODE button. In the external AV input mode (AV-IN appears on the screen), screen saver function/auto power OFF function becomes ineffective.

Signal flow

To AV IN

Audio/video cable	To audio output (red)
(supplied)
	To audio output (white)	Video equipment

To video output (yellow)

Notes

•When supplying non-standard signals such as playback images from a video deck or images from a game player, some images may be displayed incorrectly.

For example, shooting games, which shoots at a target on the screen with a light gun, may not work because of the LCD Color monitor properties.

•Normal will be set the next time the player is turned on even if you turn the power of the player off while AV-IN is set.

•The Video input (AV IN) jack is available only for the PAL signal.

56