Toshiba SD-P2800SE LCD screen/external screen selection, INTERLACED outputs/inputs ColorStream

INTERLACED outputs/inputs (ColorStream®)

Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback.

Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)

In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

PROGRESSIVE outputs/inputs (ColorStream®Pro) Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.

ColorStream and ColorStream Pro are registered trademarks of Toshiba America Consumer Products, L.L.C.

Connecting to an audio system and TV equipped with component video inputs

Signal flow

To COMPONENT VIDEO To AV OUT

Audio system

To audio inputs of the amplifier

(white)

Audio cable

(not supplied)

(red)

TV equipped with component video inputs

To CB (blue)

Component video cable (supplied)

Connections

LCD screen/external screen selection

Set AV-OUT Select of TV Menu according to the connection terminal to be used. For details, see 48 .

	TV MENU
TV Shape	16:9 Widescreen
AV-OUT	Off	Off
		CVBS/S-VIDEO
		Component 480i
		Component 480p

Output signal from the COMPONENT OUTPUT jacks.

Off	–
CVBS/S-VIDEO	–
Component 480i	480i
Component 480p	480p

Notes

To CR (red)

To Y (green)

When the AV OUT or BITSTREAM/PCM jacks are connected to the audio input terminals of an audio system, sounds of discs can be heard on the connected audio system. For instructions on connections to audio systems, see 57 .

• Make the following setting.

On-screen display	Select:	Page
“Digital Out”	“Bitstream”	46
	or	50
	“PCM”

•Refer to the owner’s manual of the connected equipment as well.

•When you connect the player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•If you place the player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the player away from the tuner and radio.

•The output sound of the player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.

•Turn off the amplifier before you connect or disconnect the player’s power cord. If you leave the amplifier power on, the speakers may be damaged.

•Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the connection to the “Standard Definition” output. If there are questions regarding our TV set compatibility with this model 525p DVD player, please contact our Customer Service Center.

55